Product Specification:
| Working mode | elevator access control, locker access control management |
| Identification type | ID card, IC card, fingerprint, magnetic card, password |
| Identification method | single card, card plus password, password, double card identification, management card + user card to open the door |
| Working temperature | -25℃-75℃ |
| Working humidity | 10-90% |
| Working voltage | DC10.8-14 V -> standard DC 12V |
| Working current | 500mA -> without card reader |
| Drive current | <7A per group -> Relay dry contact (NO, NC software adjustable) |
| Punch time slot | support -> 64 time slots |
| Validity period | support -> 1 day-100 years can be set arbitrarily |
| Offline operation | support |
| Control expansion | 3 groups connected in series to achieve 64 layers of control capacity |
| Card capacity | 26000 groups |
| Data capacity | 100,000 pieces |
| Network mode | RS485 and TCP/IP -> TCP/IP is optional |
| Networked machines | 127 sets |
| Communication distance | 1200 meters -> RS-485 networking |
| Transmission rate | 19200 baud rate -> 19200 8,1,n |
| Data retention | 10 years |
| Transmission mode | real-time, non-real-time |
| Mainboard size | length 230mm, width 145mm, height 22mm |
Product Description
- Electronic components material purchasing.
- Bare PCB fabrication.
- PCB Assembly Service. (SMT, BGA, DIP).
- FULL Test: AOI, In-Circuit Test (ICT), Functioal Test (FCT).
- Cable, Wire-harness assembly,sheet metal,Electrical cabinet Assembly service.
- Conformal coating service.
- Prototyping and mass production...
.5816 series smart card elevator/storage cabinet access control controller, also known as smart card elevator access control management system. .5816 is a system product used for layered control of elevators and authority control of people getting on and off elevators. .5816 series smart card elevator access control controller can be used to meet the needs of building property management companies or management personnel for more effective and more secure management of various personnel in and out of the elevator. By adding this system, all cardholders who enter the floor can control the authority of entering and exiting each floor. .5816 According to different personnel identities, different floor permissions are provided. You can specify that someone can only go to a certain floor, some floors or all floors, and manage each floor through permissions. Those people can reach a certain floor and those people cannot. A certain floor, and the MC5816 can perform authorization management according to the schedule. If you are not authorized by the elevator access control management system, you cannot enter the floors of the management area, and control the time period of important floors. .5816 series elevator access control management system supports offline operation, and can independently store 26,000 sets of personnel data and 100,000 records, so that all personnel entry and exit records on the floor can be traced..5816 stand-alone supports 16 floor management, and can also be extended through expansion boards. It supports 3 pieces of 16-way expansion boards, and finally can manage 64 floors. It supports RS485 networking and TCP/IP dual communication methods. Through RS485 stand-alone communication distance of 1200M, one bus supports 127 elevator access controllers, each MC-5816 provides two standard card reader interfaces, supports Wiegand 26Bit Wiegand 32Bit Wiegand40Bit card reader or fingerprint head as the identification device, all elevator access control Both input and output are equipped with voltage dynamic protection, all relay outputs are equipped with instantaneous overvoltage protection, and support fire alarm input linkage.
